Path: utzoo!attcan!uunet!cs.utexas.edu!sdd.hp.com!decwrl!ucbvax!hplabs!hpda!hpcupt1!hpindwa!tribby
From: tribby@hpindwa.HP.COM (David Tribby)
Newsgroups: comp.sys.apple2
Subject: Re: Modem/Serial ports to 38.4k baud or >
Message-ID: <54240003@hpindwa.HP.COM>
Date: 3 Jul 90 16:49:37 GMT
References: <3374@crash.cts.com>
Organization: HP Info Networks Div/Cupertino CA
Lines: 13

mdavis@pro-sol.cts.com (Morgan Davis) writes...
> 
> Most commercial IIGS terminal program (i.e. MouseTalk) bypass the serial port
> firmware altogether, with dramatic speed/performance improvements since they
> go directly to the 8530 SCC.  
> 
If the program goes directly to the 8530, can slot 2 be set up to be
"Your Card" instead of the modem port? I sure would like to move my Sider's
card out of slot 7, where it comes awfully close to my OctoRAM memory card.

--Dave Tribby
                                   - - - - -
        ARPA: tribby%hpda@hplabs.HP.COM   UUCP: hplabs!hpda!tribby