Path: utzoo!attcan!uunet!samsung!uakari.primate.wisc.edu!sdd.hp.com!elroy.jpl.nasa.gov!zardoz.cpd.com!dhw68k!felix!ung
From: ung@felix.UUCP (Bill Ung)
Newsgroups: comp.sys.apple2
Subject: Re: Apple can't keep up with 2400 baud
Message-ID: <147325@felix.UUCP>
Date: 3 Jul 90 17:00:34 GMT
References: <9228.apple.net.info-apple@pro-harvest>
Sender: daemon@felix.UUCP
Reply-To: ung@felix.UUCP (Bill Ung)
Organization: FileNet Corp., Costa Mesa, CA
Lines: 24

In article <9228.apple.net.info-apple@pro-harvest> crew@pro-harvest.cts.com (Chris Wicklein) writes:
>In-Reply-To: message from GRAY@ADMIN.HumberC.ON.CA



For once and for all, THE APPLE II CAN DO 2400 BAUD ... EASILY!!!


I have an Apple //e, whether it's enhanced, or unenhanced, running at 1MHz,
or 8Mhz, is in 80 columns or 40 columns, IT WORKS.  If it doesn't work for
you, there is something WRONG with your setup.  Go read the manual and stop
cluttering the net.

BTW: if it works on a //e at 1 MHz, it should also work on a II+ or even
a vintage II without any problems.

Now for the nice guy part: Turn the interrupts on, on the Super Serial card
in your Apple //.  That should solve all your problems.  I had the problem
once but reading the manual and a little trial and error solved my problems
in less than half an hour.


Bill Ung
  ung@felix.UUCP