Xref: utzoo comp.sys.ibm.pc.hardware:68 comp.sys.att:9883
Path: utzoo!attcan!uunet!samsung!uakari.primate.wisc.edu!uflorida!mephisto!udel!princeton!cs!samadams.princeton.edu
From: tr@samadams.princeton.edu (Tom Reingold)
Newsgroups: comp.sys.ibm.pc.hardware,comp.sys.att
Subject: need DIP switch and jumper settings for Paradise EGA2
Message-ID: <626@rossignol.Princeton.EDU>
Date: 27 Jun 90 17:30:40 GMT
Sender: news@cs.Princeton.EDU
Followup-To: comp.sys.ibm.pc.hardware
Distribution: na
Organization: not much
Lines: 19

I am trying to install a Paradise Autoswitch EGA2 board in an AT&T
6310.  (The 6310 is an 80286 machine with an builtin video board.  I
disabled this video board with a jumper according to instructions I
received from AT&T.)

I either get no video or random colors with each character a different
color.

Does anyone know what the DIP switch and jumpers should be set at?
I don't have the manual for the hardware.

Thanks!
--
                                        Tom Reingold
                                        tr@samadams.princeton.edu
                                        rutgers!princeton!samadams!tr
                                        201-560-6082
                                        "Brew strength depends upon the
                                         amount of coffee used." -Black&Decker