Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!decwrl!ucbvax!MTUS5.BITNET!TDSTRONG
From: TDSTRONG@MTUS5.BITNET (Tim Strong)
Newsgroups: comp.sys.handhelds
Subject: HP 48 --> Apple IIc
Message-ID: <9007022311.AA13640@csla.csl.sri.com>
Date: 2 Jul 90 23:52:09 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Distribution: inet
Organization: The Internet
Lines: 18


I have managed to make a cable linking my Apple IIc to my 48.  I know my
cable is correct because it worked for a little while.  However I changed a
setting in my Apple II Kermit and it no longer works.  Unfortunately I don't
recall which setting.  I have checked all the ones the 48 will display.
Basically the two machines both never connect.  When I try to send from my 48
It says connecting and Retry # and counts for a while.  I don't know any thing
about Kermit.  Heeeeeelllllllllppppppp!  Which setting is the most likely
culprit. What should it be?

Please if you have any idea tell me I'm stuck.

===========================================================================
     ___                     Tim Strong  <TDSTRONG@MTUS5.BITNET>
     |__)  _   _|  _   _     Michigan Technological University
     |  | (_| (_| (_| |      HOUGHTON, MI  49931
                                        U.S.A.
===========================================================================