Path: utzoo!attcan!uunet!cs.utexas.edu!rice!uw-beaver!fluke!moriarty
From: moriarty@tc.fluke.COM (Jeff Meyer)
Newsgroups: comp.sys.mac.hardware
Subject: ImageWriter II print quality with MS Works -- Addenum
Message-ID: <1990Jun29.201621.1890@tc.fluke.COM>
Date: 29 Jun 90 20:16:21 GMT
References: <1990Jun29.065233.1383@tc.fluke.COM>
Reply-To: moriarty@tc.fluke.COM (Jeff Meyer)
Organization: The John Fluke Mfg. Co., Inc., Everett, WA
Lines: 19

In article <1990Jun29.065233.1383@tc.fluke.COM> moriarty@tc.fluke.COM (moi) writes:
>However, Dad says that unless he sets the Imagewriter's setting to "Best",
>the print quality isn't as good.  He's not positive, but wondered if I could
>ask the net whether anyone using MS Works with an ImageWriter II has the
>same problem.

Quick note:  Dad is always trying to print in Best mode via the Print dialog
box, *not* in draft mode.  I've been reminded about how the quality switch
can effect draft mode fonts.

                           "`Spock-O?'"
                                                     "We drove a flivver."
                           "I have no doubt."
---
                                        Moriarty, aka Jeff Meyer
INTERNET:     moriarty@tc.fluke.COM
Manual UUCP:  {uw-beaver, sun, microsoft, hplsla, uiucuxc}!fluke!moriarty
CREDO:        You gotta be Cruel to be Kind...
<*> DISCLAIMER: Do what you want with me, but leave my employers alone! <*>