Path: utzoo!attcan!uunet!samsung!know!zaphod.mps.ohio-state.edu!usc!ucsd!ucbvax!hplabs!hpda!hpcuhc!hpausla!denis From: denis@hpausla.aso.hp.com (Denis Rachal) Newsgroups: comp.sys.mac.hardware Subject: Re: Re: Ram Upgrade->SE30 same as 2cx Message-ID: <3770002@hpausla.aso.hp.com> Date: 2 Jul 90 22:21:27 GMT References: <8121@ur-cc.UUCP> Organization: HP Australian Software Operation Lines: 19 Allan Greenleaf writes in comp.sys.mac.hardware: > Yes, the SE30 is the same as the IIcx. If you put the 4 one-meg > SIMMS in the second bank, the machine will work but you will have > only a 2 meg computer! I can't get my RAM upgrade to work in my SE30. If I put the 4 one-meg SIMMS in bank A (marked as 1 & 2 on the board) I get 4 tones on power up and garbage on my screen. If I put them in bank B I get a 2 meg SE30 as you have just described. It works OK, but I only get 2 megs. What's up? Are there any jumpers or resistors on the SE30? The instructions didn't mention any. Any help at all would be appreciated. ************************************************************ Denis Rachal Hewlett-Packard - Australian Software Operation Disclaimer - HP could care less about my Mac & it's RAM. ************************************************************