Xref: utzoo comp.sys.mac.hardware:4194 comp.sys.mac.system:692
Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!cs.utexas.edu!oakhill!pete
From: pete@oakhill.UUCP (Pete Percosan)
Newsgroups: comp.sys.mac.hardware,comp.sys.mac.system
Subject: mac se memory upgrade
Keywords: 4meg, whats the trick?
Message-ID: <3479@chomsky.oakhill.UUCP>
Date: 3 Jul 90 14:35:14 GMT
Organization: Motorola Inc. Austin, Tx
Lines: 17

Hello -

   I have a question concerning the process for upgrading a new
   mac se (with 20meg hd). I looked at the motherboard and located
   the simms (not to tough) and a jumper for 1 or 2/4 meg (does this
   mean that you can only install 4 256x8 - 1 meg, 4 512x8 - 2 meg,
   or 4 1024x8 - 4 meg simms?). when i installed the 4 1024x8s and set
   the jumper to the 2/4 meg setting, i found that the system only
   thought that there was a single meg installed.

   any pointers would be appreciated.

   pete percosan


p.s. assuming the correct memory speeds, will memory used for the mac II work
     in the se? and vice versa.