Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!mips!pacbell.com!pacbell!hoptoad!peora!tarpit!bilver!bill
From: bill@bilver.UUCP (Bill Vermillion)
Newsgroups: comp.sys.tandy
Subject: Re: 16B/6000 hardware/info source - still around?
Message-ID: <798@bilver.UUCP>
Date: 28 Jun 90 02:06:18 GMT
References: <1990Jun22.055106.547@coyote.uucp>
Reply-To: bill@bilver.UUCP (Bill Vermillion)
Distribution: usa
Organization: W. J. Vermillion, Winter Park, FL
Lines: 23

In article <1990Jun22.055106.547@coyote.uucp> jmh@coyote.UUCP (John Hughes) writes:
>A while back I posted asking for sources of technical info and
>hardware for the Tandy 16B/6000 series Xenix machines. Several
>folks were good enough to respond and suggested I contact a
>fellow by the name of Bob Snapp. I tried sending a letter and
>got no response. Does anyone know of a current address for
>Mr. Snapp, or even if he still has any interest in these poor
>old machines?

Bob stays busy, so a phone call would be better.   He also moved to bigger
location about 2 years ago so your mail may have gone astray.

Bob still makes 2 meg memory boards for the 6000.  Has SCSI adaptors and
drivers so you can hang 8 SCSI drives on the system.  Made a model 12000 that
support 15 users.  In short, if it can be done on a t6k, Bob can do it.

Phone is (513) 891-4496 - Cincinatti, OH.



-- 
Bill Vermillion - UUCP: uunet!tarpit!bilver!bill
                      : bill@bilver.UUCP