Path: utzoo!attcan!uunet!cs.utexas.edu!sdd.hp.com!ucsd!ames!dftsrv!jagmac2.gsfc.nasa.gov!jim
From: jim@jagmac2.gsfc.nasa.gov (Jim Jagielski)
Newsgroups: comp.unix.aux
Subject: EtherPortII
Message-ID: <2669@dftsrv.gsfc.nasa.gov>
Date: 2 Jul 90 15:27:52 GMT
Sender: news@dftsrv.gsfc.nasa.gov
Reply-To: jim@jagmac2.gsfc.nasa.gov (Jim Jagielski)
Distribution: na
Organization: NASA Goddard Space Flight Center
Lines: 16

As I have said in previous messages, I'm running 1.1, but very soon will
be upgrading to 2.0. I'm currently using the EtherPortII card and I was
wondering if the device drivers for the card under 2.0 is the same as under
1.1. In other words, will I need new installation software for the card
when I upgrade to 2.0??

E-mail is most welcome!


--
===========================================================================
 #include <std/disclaimer.h>
                                 =:^)
           Jim Jagielski                    NASA/GSFC, Code 711.1
     jim@jagmac2.gsfc.nasa.gov               Greenbelt, MD 20771
===========================================================================