Xref: utzoo comp.unix.xenix:12207 comp.unix.questions:23320 Path: utzoo!attcan!uunet!sci34hub!gary From: gary@sci34hub.UUCP (Gary Heston) Newsgroups: comp.unix.xenix,comp.unix.questions Subject: Re: Xenix net or TCP/IP? Keywords: network Message-ID: <670@sci34hub.UUCP> Date: 26 Jun 90 15:08:44 GMT References: <3303@crash.cts.com> Reply-To: gary@sci34hub.sci.com (Gary Heston) Organization: SCI Technology, Inc., Huntsville, Al. Lines: 38 In article <3303@crash.cts.com> rick@crash.cts.com (Rick Stout) writes: >I need to network two Compaq 386 boxes running SCO Xenix. One of >these boxes will be upgraded to SCO Unix as soon as WordPerfect >finishes their port. ??? I've been running a copy of WordPerfect under ISC 1.0.6 for at least a year (they list it as their Interactive/Microport version). This port should also run under SCO Unix, and the Xenix version should as well. I don't see why you're waiting, unless it's for a newer rev of SCO Unix. >Is SCO Xenix Net the best software to use to network the two? >When the one box is upgraded to Unix will it make the networking >more complicated? I'm told that Xenix Net isn't available under SCO Unix, so it's probably not the best route to future connectivity. I'm also told that Xenix doesn't have NFS, so you'd be blocked there, too. >What are the best ethernet cards to use? Is thick or thin wire >better? Will the hardware be compatible after the upgrade? We use WD8001E/B cards, with thin cable, and have no problems. That's using Novell, rather than a Unix network. I don't understand your last question--the only hardware issue you're likely to run into is interrupts, if you have several expansion boards in your systems. Otherwise, they'll never notice. Incidentally, only consider thick Ethernet for long-distance network connections. It costs about 10x what the thin stuff does, and requires special tap boxes. (Long-distance meaning over 300 meters or so.) -- Gary Heston { uunet!sci34hub!gary } System Mismanager SCI Technology, Inc. OEM Products Department (i.e., computers) "The esteemed gentleman says I called him a liar. That's true, and I regret it." Retief, a character created by Keith Laumer.