Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!mit-eddie!uw-beaver!zephyr.ens.tek.com!tekgen!teksce!dales
From: dales@teksce.SCE.TEK.COM (Dale Snell)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Panasonic KXP1124 printer
Summary: Use the NEC_Pinwriter driver
Keywords: Pansasonic KXP 1124 printer , printer driver
Message-ID: <3493@teksce.SCE.TEK.COM>
Date: 10 Jul 90 19:09:57 GMT
References: <546@beguine.UUCP>
Reply-To: dales@teksce.SCE.TEK.COM (Dale Snell)
Organization: The Thumps Memorial Home for the Recursively Bemused
Lines: 23

In article <546@beguine.UUCP> Steven.Ayscue@samba.acs.unc.edu (BBS 
Account) writes:
|I use the Panasonic 1124 printer but have been stuck with the
|360x180 resolution graphics mode of the Epson emulation mode.
|Can anyone point me to a printer driver that the IBM Proprinter
|mode can use so I can get those 360x360 dpi graphics out?
|

     Try using the NEC_Pinwriter printer driver.  Density six or seven,
I forget which, will give you the 360x360 density.  The NEC driver is
the same as the EpsonQ driver, but with the addition of the extra
density setting.  I use this with my KX-P1624, and it works just fine. 
(The NEC_Pinwriter driver came on your 1.3 Extras disk, and is
documented in the 1.3 Enhancer Manual.)


                                    Seizure later,
				    --dds

Hark! Hark! The dogs do bark,       | Dale D. Snell       BIX:  ddsnell
The Duke is fond of kittens.        | Usenet:  dales@teksce.SCE.TEK.COM
He likes to turn their insides out, | C$erve:  74756.666@compuserve.COM
And use their fur for mittens!      | What's a disclaimer?