Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!mailrus!iuvax!silver!amhartma
From: amhartma@silver.ucs.indiana.edu (Andy Hartman (AmigaMan))
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Panasonic KXP1124 printer
Summary: Density 7
Keywords: Pansasonic KXP 1124 printer , printer driver
Message-ID: <50408@iuvax.cs.indiana.edu>
Date: 10 Jul 90 22:00:56 GMT
References: <546@beguine.UUCP> <3493@teksce.SCE.TEK.COM>
Sender: root@iuvax.cs.indiana.edu
Organization: Indiana University, Bloomington IN.
Lines: 18

In article <3493@teksce.SCE.TEK.COM> dales@teksce.SCE.TEK.COM (Dale Snell) writes:
>     Try using the NEC_Pinwriter printer driver.  Density six or seven,
>I forget which, will give you the 360x360 density.  The NEC driver is
>the same as the EpsonQ driver, but with the addition of the extra
>density setting.  I use this with my KX-P1624, and it works just fine. 
>(The NEC_Pinwriter driver came on your 1.3 Extras disk, and is
>documented in the 1.3 Enhancer Manual.)

It's Density 7 that gives you 360 X 360. (two passes of the printhead)

>                                    Seizure later,
>				    --dds

AMH
* Andy Hartman       | I'd deny half of this crap anyway!| "Somedays, you just
* Indiana University |-----------------------------------|  can't get rid of a
*    //	 Amiga Man   |   amhartma@silver.ucs.indiana.edu |  bomb!" 
*  \X/	 At Large!   |   AMHARTMA@rose.ucs.indiana.edu   | - Batman (original)