Path: utzoo!utgpu!watserv1!watmath!att!mcdchg!ddsw1!igloo!miroc!caw From: caw@miroc.Chi.IL.US (Christopher A. Wichura) Newsgroups: comp.sys.amiga.tech Subject: Re: UUCP 1.06 and the A3000 Message-ID: Date: 4 Jul 90 00:09:24 GMT References: <1414@nyx.UUCP> Lines: 33 >In article <1414@nyx.UUCP> bscott@nyx.UUCP (Ben Scott) writes: >In article tracy@taishan.cinnet.com (Tracy S. Schuhwerk) writes: >>Has anyone successfully used the latest version of UUCP (1.06) on the >>3000 yet? I just tried and failed miserably. Seems like it wants to >>Guru the machine on a write to the HD (THE GURU WILL NEVER DIE!). I >>was running 1.03 with limited success (I had to run it under KS 1.3) >>but 1.06 dies under both KS 2.0 and 1.3! > > >My own UUCP node is having some severe problems as well. It started out >perfect and was running fine for days, then it began to give error messages >(in the logfile) and not transfer anything during sessions, and finally >it's just not transmitting or receiving (though it does connect succesfully). >All this happened very shortly after (but not right as) I switched to v1.06D >from 1.05... I too had a HD crash during a UUCP session as well, but I'm not >sure that was at all related. UUCP v1.06D does, in fact, crash on the 3000. It is after it receives a file or when it is hanging up after a send only. However, I got uucico to work on my system by recompiling it with Lattice 5.05 and haven't had any problems since (guess Matt has a bug in DICE, eh?). -=> CAW /////////////////////////////////////\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ Christopher A. Wichura caw@miroc.chi.il.us (my amiga) u12401@uicvm.uic.edu (my school account) Please! Do not send mail to my school account unless mail to miroc bounces. I often do not check uicvm.uic.edu for periods in excess of a week. \\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\//////////////////////////////////////