Xref: utzoo comp.sys.amiga.tech:13240 comp.sys.amiga:61409 Path: utzoo!attcan!uunet!cs.utexas.edu!sdd.hp.com!usc!apple!amdahl!JUTS!ked01 From: ked01@ccc.amdahl.com (Kim DeVaughn) Newsgroups: comp.sys.amiga.tech,comp.sys.amiga Subject: Lattice support for Amiga products now on BiX Keywords: Lattice, support, compiler, BiX Message-ID: Date: 7 Jul 90 22:49:55 GMT Organization: Amdahl Corporation, Sunnyvale, CA 94086 Lines: 38 [ "Send lawyers, guns, and money ..." ] I was just on the Lattice BBS checking for any new "fixes" to v5.05. The following banner msg is now displayed when you log on: "Effective IMMEDIATELY, ELECTRONIC support for the Lattice AmigaDOS C compiler is only available on the BIX network. AmigaDOS C development and technical support is being assumed by SAS Institute Inc. Until the transition is complete, support will not be offered over the LBBS. Information on BIX can be gotten by calling 1-800-227-2983. Live happily, Carlotta " BTW, there was one new (post v5.05 fixes file) item for the Amiga in the fixes section: Name Date Product Description ============= ========= ========= =================================== FPINIT.ARC 06/29/90 Amiga C Source to fpinit, allows precision 1,679 BYTES 5.0X and rounding parameter for 68881. This is a small source file which allows the setting of the precision and rounding parameters on 68881 coprocessors. If you grab this, you might want to chop off all the damned CR's from the end of each line in the fpinit.c file ... sheesh ...! /kim -- UUCP: kim@uts.amdahl.com -OR- ked01@juts.ccc.amdahl.com or: {sun,decwrl,hplabs,pyramid,uunet,oliveb,ames}!amdahl!kim DDD: 408-746-8462 USPS: Amdahl Corp. M/S 249, 1250 E. Arques Av, Sunnyvale, CA 94086 BIX: kdevaughn GEnie: K.DEVAUGHN CIS: 76535,25