Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!zaphod.mps.ohio-state.edu!uwm.edu!bionet!ames!sun-barr!newstop!texsun!digi.lonestar.org
From: ajahn@digi.lonestar.org (Alfredo Jahn)
Newsgroups: comp.sys.amiga.tech
Subject: RAM MEMORY TESTING
Message-ID: <772@digi.lonestar.org>
Date: 10 Jul 90 13:08:41 GMT
Sender: ajahn@digi.lonestar.org
Organization: DSC Communications, Plano Tx.
Lines: 26

I have a RAM memory test program (supplied by GVP) which can be used to 
test memory.  My question is:  If I have a 5 meg machine (A2000 with 1 
meg on the mother board, a 2 meg amiga board and a GVP controller with
2 meg on it) what starting and ending address do I give the ram test 
program so that all of ram gets tested.  Here is what GVP told me to 
do to test the 2 meg on the GVP controller...

 1) boot and press ctrl-d before the FastMemFirst gets executed
 2) test mem starting at 230000 and ending at 3fffff.

Is it possible to test starting at 0000000 ??  Where is the OS loaded?
Will I crash the system if I start that low?

Please reply via email at my "home" node:

      alfredo@ajahnv.lonestar.org

Thanks in advance...

 - alfredo jahn

--------------------------------------------------------------------------
 Alfredo Jahn V, DSC Communications      UUCP: {uunet,texbell}!digi!ajahn
 1000 Coit Road                        Internet: ajahn@!digi.lonestar.org
 Plano, TX 75075  Voice: 214-519-3545   Home: alfredo@ajahnv.lonestar.org
--------------------------------------------------------------------------