Path: utzoo!attcan!uunet!nuchat!paulh From: paulh@nuchat.UUCP (Paul Hutmacher) Newsgroups: comp.sys.apple2 Subject: Re: Copying SYSTEM DISK to /ram5 Message-ID: <25582@nuchat.UUCP> Date: 7 Jul 90 13:42:10 GMT References: <9007070640.AA26508@apple.com> Reply-To: paulh@nuchat.UUCP (Paul Hutmacher) Organization: Houston Public Access Lines: 23 In article <9007070640.AA26508@apple.com> JWANKERL%UTCVM@PUCC.PRINCETON.EDU ("Josef W. Wankerl") writes: >As I said in a previous post a long while back, I also have the problem >with the shutdown hanging the system. Not only do *I* have the problem, >but my previous roommate had it, and so does my employer on his two >machines. I too had problems with shutdown not wanting to work properly and hanging the system. I've always attributed it to a weird da or init and end up removing the last installed da or init and all goes well after that. May I suggest you remove all your system files and re-install system 5.0.2 from the ground up sans patches, inits, da's, etc and then adding those one at a time until you discover the problem. My Apple system software always seems to do what it's supposed to do until I start playing around with it and adding my own "improvements" ;) -- Paul Hutmacher | paulh@nuchat.UUCP |Sometimes the only thing a P.O. Box 66046 | {texbell, uunet}!nuchat!paulh |western savage understands Houston, TX 77266|paulh%nuchat.uucp@uhnix1.uh.edu|are whiskey and rifles and 713/526-0612 CDT | Smile, you're on usenet. |an unarmed man like you.