Path: utzoo!attcan!uunet!seismo!dimacs.rutgers.edu!rutgers!ucsd!swrinde!zaphod.mps.ohio-state.edu!samsung!sdd.hp.com!hplabs!hpl-opus!hpspdra!pault From: pault@hpspdra.HP.COM (Paul Taira) Newsgroups: comp.sys.ibm.pc Subject: Re: MS Word 5.0 and lists Message-ID: <11960002@hpspdra.HP.COM> Date: 11 Jul 90 00:09:09 GMT References: <11810@sdcc6.ucsd.edu> Organization: HP Stanford Park - Palo Alto, CA Lines: 67 >/ hpspdra:comp.sys.ibm.pc / bruno@sdcc10.ucsd.edu (Bruce W. Mohler) / 10:12 am Jul 10, 1990 / >Does anyone know of an easy way to produce "bullet" >or "dash" lists in MS Word 5.0? > >[I'm from the nroff/troff world where you just > > .BL > .LI > item 1 > .LI > item 2 > .LI > item 3 > .LE There are several steps which I use to produce a bullet list with MS Word. 1) Define you paragraph formatting: Left Indent = 1.0" (try current left indent + 1.0") First line indent = -0.5" Right Indent = 1.0" (optional) This will let the first line of each paragraph hang out 0.5" to the left of the remainder of the paragraph. Adjust to taste (sort of like salt & pepper to taste). 2) Set a tab setting at 1.0" (this should be the same as the Left Indent) 3) To produce a bullet (for the IBM Extended character set) I use Alt-254. Hold down the alt key and press "2" "5" "4" on the key pad then release the alt key. This will produce a small square which we will use as a bullet. 4) After entering the Alt-254, press tab and start typing in the information required for that bullet. If you press return, you will be ready to insert a bullet and new information. You will not need to redefine the paragraph formatting a second time. 5) Hint: I use alt F7 to display the character spacing which producing a bullet list. Hint2: I would recommend that you add the bullet list in as a style sheet so that you will not need to go through the hassle again. Note: The ASCII code for the bullet might vary with different printers and character sets. Check you printer reference manual for details. Have Fun, Paul Taira >Its visually ugly, but trivially simply to build >(nested) lists in documents.] > >Thanks, in advance! > >Bruce > >-- >Bruce W. Mohler >Systems Programmer (aka Staff Analyst) >bruno@sdcc10.ucsd.edu >voice: 619/586-2218 >>----------