Path: utzoo!attcan!uunet!drivax!frotz From: frotz@drivax.UUCP (Frotz) Newsgroups: comp.sys.ibm.pc Subject: Re: Codeview & GEM Message-ID: Date: 10 Jul 90 17:22:05 GMT References: <18261@ttidca.TTI.COM> Sender: frotz@drivax.UUCP Reply-To: frotz@drivax.UUCP Organization: Digital Research, Monterey CA Lines: 29 woodside@ttidca.TTI.COM (George Woodside) writes: ] What is the configuration/setup and steps to initate a Codeview/GEM ] debugging session? ] I have a 4M 386 with a VGA and now a monochrome adapter as well. ] I get the initial Codeview display on the monochrome adapter, but ] the updates of the monochrome screen are corrupted, with reverse ] video sections left on, and other garbage. And, I get nothing on the ] VGA. What the graphics engineers here do is: Use a hercules screen driver and use the VGA as the Turbo Debugger (in your case Codeview) output display. This allows the debugger to take advantage of the 80x50 or 80x43 line text modes while debugging while maintaining a correct graphic display on your hercules adapter. NOTE: I no longer work for the graphics. -- John "Frotz" Fa'atuai frotz%drivax@uunet.uu.net (email@domain) Digital Research, Inc. {uunet|amdahl}!drivax!frotz (bang!email) c/o MIS Dept. (408) 647-6570 (vmail) 80 Garden Court, C13 (408) 649-3896 (phone) Monterey, CA 93940 (408) 649-0750 (fax) ========== "He who knows does not speak. He who speaks does not know." -- Lao Tzu