Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!ucsd!swrinde!zaphod.mps.ohio-state.edu!samsung!munnari.oz.au!mel.dit.csiro.au!yarra!monu6!edp148l
From: edp148l@monu6.cc.monash.edu.au (Andrew Moore)
Newsgroups: comp.sys.ibm.ps2.hardware
Subject: PS/2 Harddisks
Message-ID: <1990Jul11.111609.259@monu6.cc.monash.edu.au>
Date: 11 Jul 90 11:16:09 GMT
Organization: Chisholm Institute of Technology, Melb., Australia
Lines: 25

Hi all,
	  I am trying to track down the pinouts on a PS/2 harddisk
(the 30 somthing pin job that combines data/control and power) I remember 
an article in PC Tech Journal about the PS/2's a while back but didn't notice
anything on these pinouts... (also I assume it is still an ST506 type 
controller setup just with an IBM(tm) type connector, correct me if I
am wrong)....

All help appreciated.

Also while I am here, anybody got any good references on the PS/2's from
a hardware point of view, A collegue has to keep a labs worth
running and needs all the help he can get...

Thanks
Andrew.

 ____________
/\  _________\   Andrew Moore   edp148l@monu6.cc.monash.edu (...edu.au)
\ \ \______  /  edp148l%monu6.cc.monash.edu.au@uunet.UU.NET
 \ \ \  / / /  {hplabs,mcvax,uunet,ukc}!munnari!monu6.cc.monash.edu.au!edp148l
  \ \ \/ / /  +613-573-2297 (human) +613-573-2745 (fax)
   \ \/ / /  Faculty of Computing and Information Technology,
    \  / /  Monash University, Caulfield Campus, PO Box 197,
     \/_/  Caulfield East, Melbourne, Victoria, 3145, Australia.