Path: utzoo!attcan!uunet!cs.utexas.edu!swrinde!ucsd!helios.ee.lbl.gov!nosc!halibut.nosc.mil!koziarz
From: koziarz@halibut.nosc.mil (Walter A. Koziarz)
Newsgroups: comp.sys.zenith.z100
Subject: 512 Byte sectors wanted on Miniscribe Model 2012
Message-ID: <2485@nosc.NOSC.MIL>
Date: 5 Jul 90 14:09:41 GMT
Sender: nobody@nosc.NOSC.MIL
Reply-To: koziarz@halibut.nosc.mil.UUCP (Walter A. Koziarz)
Organization: Naval Ocean Systems Center, San Diego
Lines: 11
X-Local-Date: 5 Jul 90 07:09:41 PDT

I'm at a loss to explain it, but I can't seem to convince 'PREP' to format this
disk with 512 byte sectors (alledgedly, the default).  It keeps forcing 1024
byte sectors on me, without me issuing the '/k' switch.  I have PREPped the
drive in a z150 in an attempt to TOTALLY corrupt the system-parameters area on
the disk.  Then re-ran z100 PREP.  Same result!  1024 byte sectors (implies
4096 byte clusters!).  Is there anyone who has an idea on this??

Btw, I used the same PREP executable on this drive as I used on my home machine
(home machine HAS 512 byte sectors and 2048 byte clusters).

Walt K.