Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!samsung!zaphod.mps.ohio-state.edu!sol.ctr.columbia.edu!ira.uka.de!fauern!tumuc!guug!ixos!micha
From: micha@ixos
Newsgroups: comp.unix.i386
Subject: ODT interlaced Tseng Labs card
Keywords: ODT VGA interlaced Tseng Labs
Message-ID: <1234@ixos.UUCP>
Date: 9 Jul 90 06:41:30 GMT
Sender: micha@ixos.UUCP
Reply-To: micha@ixos ()
Organization: iXOS Software, Munich, West Germany
Lines: 20

Hello out there!

Who can help me? My SCO ODT seems to activate the
                      *interlaced* 
mode at the 1024x768 resolution on my Tseng Labs Video Card (Genoa 5400).

Since I own an EIZO 9070S, I want to use the non-interlaced mode.

386/ix lets choose you non interlaced/interlaced mode, but SCO has no such 
feature.  The only card which allows different modes, is the Video 7 1024i,
where three (!) modes are possible (44, 48 and 65 MHz). But this card is not
compatible to the Tseng Labs cards.

Micha


#include "sys/disclaimer.h"   +   There's nothing to say bout soccer anymore.
			      +
micha@ixos.uucp               +
archive-server@unido.uucp     +