Path: utzoo!attcan!uunet!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.hardware
Subject: Re: Non Flicker Cable
Message-ID: <281@cbmger.UUCP>
Date: 13 Jul 90 13:46:47 GMT
References: <50727@iuvax.cs.indiana.edu>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 16

In article <50727@iuvax.cs.indiana.edu> jfath@silver.ucs.indiana.edu (jerome fath) writes:
>I recently bought a cable from Pre'Spect Technics that allows using a 
>TTL monochrome monitor on an amiga.

Well, a TTL monitor is not the best choice, because it normally can
display only three different shades. So you may lose valid information
on accident by just seeing nothing when color choice happens to not
live well with TTL.
Better would be a composite monitor. The Amiga provides already an
output for them. Here you get all possible shades of grey.
But I have to admit these monitors are not easily available, but if,
then rather inexpensive.

-- 
Best regards, Dr. Peter Kittel      //     E-Mail to 
Commodore Frankfurt, Germany      \X/      rutgers!cbmvax!cbmger!peterk