Xref: utzoo comp.sys.amiga.tech:13344 comp.sys.amiga.hardware:2548
Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!wuarchive!decwrl!bacchus.pa.dec.com!e2big.mko.dec.com!decuac!haven!mimsy!mojo!news
From: lidl@eng.umd.edu (Kurt J. Lidl)
Newsgroups: comp.sys.amiga.tech,comp.sys.amiga.hardware
Subject: Changing Maxtransfer on GVP partition
Message-ID: <1990Jul14.073731.10927@eng.umd.edu>
Date: 14 Jul 90 07:37:31 GMT
Sender: news@eng.umd.edu (The News System)
Organization: College Of Engineering, Univ. of MD, College Park
Lines: 19

I seem to remember catching the tail-end of a discussion that
relates how to change the Maxtranfer parameter of a GVP partition.

It is obviously more difficult than just editting the mountlist
file, because my 2000 auto-boots and auto-mounts its partitions,
so the info must be encoded someplace in the boot-tracks that
the GVP installation installs on the disk.

If anyone knows anything about this, and has the patch that I am talking
about please, please e-mail it to me!  (I also read all the comp.sys.amiga
newsgroups, but I doubt that everyone wants to see this again.)

(BTW -- hardware is as follows:  1020 5.25" floppy, 2 internal 3.5"
drives, Seagate 296N disk drive, GVP Impact 2000/2 controller,
B2000 4.3rev motherboard, 2002 monitor.)  Thanks in advance.

--
/* Kurt J. Lidl (lidl@eng.umd.edu) | Unix is the answer, but only if you */
/* UUCP: uunet!eng.umd.edu!lidl    | phrase the question very carefully. */