Path: utzoo!attcan!uunet!mcsun!cernvax!chx400!ethz!visinfo From: visinfo@ethz.UUCP (VISINFO c/o Sascha Schnapka) Newsgroups: comp.sys.amiga.tech Subject: Re: COMMODORE PLEASE READ Re: A3000 and a genlock Keywords: A3000 genlock A2300 Message-ID: <5142@ethz.UUCP> Date: 17 Jul 90 15:05:21 GMT References: <19027@well.sf.ca.us> <14297@venera.isi.edu> Reply-To: visinfo@bernina.ethz.ch.UUCP (VISINFO c/o Peter Simeon) Distribution: comp Organization: ETH Zuerich, Switzerland Lines: 30 In article <14297@venera.isi.edu> schur@venera.isi.edu (Sean Schur) writes: >I would appreciate it if someone at Commodore (or equally knowledgable) will >address this issue. I have sent messages about this problem and have seen at >least 4 others with the same problem. > >The problem is using a genlock with a 3000/1950 combination. I am having the >problem with a Progen genlock, I have read inquiries here about the same >problem with Supergen, Scanlock and Commodore's own 2300 (see below). > >With the genlock plugged into the 23 pin video out the 1950 is unviewable. >This is true with the monitor plugged into either the throughput of the >genlock (essentially plugging it into the 23 pin slot) or with the genlock >still in the 23 pin slot and the monitor in the VGA out. The machine boots >with the genlock plugged in put the monitor picture turns a dark grey and >vertically flips VERY fast and is not fixable by monitor adjustments. >However, in this situation the genlocked video output is fine and usable. Here are two other genlocks which have the same problems: MiniGen (PAL Version) Rendale A8600 (Very old one, baught it 1986) I would be interested if there are any S-VHS PAL genlocks which work together with the Display Enhancer on the Amiga 3000. /* -------------------------- SG (Simeon Graphics) ---------------------- */ /* Peter Simeon, UUCP: | // // */ /* visinfo@bernina.ethz.ch | // Long live the AMIGA! // */ /* BIX: hardwiz | \X/ \X/ */ /* ---------------------------------------------------------------------- */