Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!samsung!cs.utexas.edu!lgc.lgc.com!usenet
From: max@maxsun.lgc.com (Max Heffler)
Newsgroups: comp.sys.apple2
Subject: Kermit problems
Keywords: I forgot to mention I am using a Super Serial Card
Message-ID: <1990Jul17.140834.18842@lgc.com>
Date: 17 Jul 90 14:08:34 GMT
Sender: usenet@lgc.com
Followup-To: max@lgc.com
Organization: Landmark Graphics Corp., Houston, Tx
Lines: 19

In my last post about kermit problem I forgot to mention I am using a Super
Serial Card.  I did more tests last night with both the Hayes 2400 and a
Telebit Trailblazer Plus.  The Hayes still responds NO CARRIER when the
standard carrier is received (it does not have this problem with any of 5
other comm programs tested).  I played with TIMING (I am on a IIGS), TIMER,
ATs7=255, commas after the phone number, and everything else I could think of.
I then tried the Telebit and could only talk to it at 4800, 9600, and 19200
baud.  It would connect, but I was in a very strange mode where every time
I hit the repeat key, four or so characters of the login prompt would appear.
After hitting the return key about 20 or 30 times, I could get to a login
prompt, but it did not seem to echo (probably all the queued up returns)
Is there any kermit guru out there that can help?  Does anyone have a
X/Y/ or ZModem that works on the IIGS that they could post or email to me.
Thanx...
--
Max Heffler			internet: max@lgc.com
Landmark Graphics Corp.		uucp: ..!uunet!lgc!max
333 Cypress Run, Suite 100      phone: (713) 579-4751
Houston, Texas  77094