Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uwm.edu!rpi!zaphod.mps.ohio-state.edu!sdd.hp.com!decwrl!ucbvax!van-bc!rsoft!mindlink!a427
From: a427@mindlink.UUCP (Ian Upright)
Newsgroups: comp.sys.mac.comm
Subject: Re: z protocols
Message-ID: <2419@mindlink.UUCP>
Date: 11 Jul 90 20:12:10 GMT
Organization: MIND LINK! - British Columbia, Canada
Lines: 10

Does anyone know of any program to use that will transfer in z protocol?
My problem is that I use a networked modem and to access the modem
through the printer port.  Zterm, as far as I can see, does not allow
the user to change the port used.

If you go under the Settings menu and select Global Settings in Zterm 0.85,
there are some radio buttons that allow you to change the port where the modem
is.
L8ter.
Ian Upright.