Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!samsung!munnari.oz.au!metro!otc!jlo
From: jlo@otc.otca.oz (John O_Neill)
Newsgroups: comp.sys.mac.comm
Subject: Re: Multiple serial port cards for Mac II?
Message-ID: <1798@otc.otca.oz>
Date: 13 Jul 90 17:12:44 GMT
References: <10511@batcomputer.tn.cornell.edu>
Lines: 18

in article <10511@batcomputer.tn.cornell.edu>, mha@batcomputer.tn.cornell.edu (Mark H. Anbinder) says:
> 
> I'm trying to find a NuBus card for the Mac II that offers multiple
> serial ports.  It seems that SuperMac's Comm card no longer exists.
> Is this true?
> 

I have been using DigiBoard's NuXi 8-port serial card for a few weeks.
It has CTB support, for MacOS and A/UX. Works fine with MacTerminal 3.0.
However, if you have EtherTalk installed, then the DigiBoard INIT causes
problems - neither the Network CDEV nor AdminTCP "see" EtherTalk or Ethernet.
The octopus cable with its 8 D-25 DTE connectors is a handful!

 -- 
 John O'Neill, Systems Engineer -  Apple Computer Australia Pty Ltd
 USENET: jlo@otc.oz.au
 AppleLink: AUSTEDSUP
 Disclaimer: "Opinions expressed are not Apple's opinions"