Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!pacific.mps.ohio-state.edu!ohstpy!miavx1!rapickering
From: rapickering@miavx1.acs.muohio.edu
Newsgroups: comp.sys.mac.comm
Subject: Re: z protocols
Message-ID: <1755.269f2403@miavx1.acs.muohio.edu>
Date: 14 Jul 90 18:54:09 GMT
References: <2419@mindlink.UUCP>
Lines: 22

In article <2419@mindlink.UUCP>, a427@mindlink.UUCP (Ian Upright) writes:
> Does anyone know of any program to use that will transfer in z protocol?
> My problem is that I use a networked modem and to access the modem
> through the printer port.  Zterm, as far as I can see, does not allow
> the user to change the port used.
> 
> If you go under the Settings menu and select Global Settings in Zterm 0.85,
> there are some radio buttons that allow you to change the port where the modem
> is.
> L8ter.
> Ian Upright.

Well, White Knight has a really nice full featured terminal emulator and
transfers in x, y, z, and kermit protocols.

    I posted upgrade patches for White Knight a long time ago to 
comp.mac.binaries.  The current commercial version is I believe 11.02
However, through America Online you can upgrade to 11.07.

    It's a very nice program with lots of features, around $100 from MacConn.

                           -Rob