Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!jarthur!sellswor
From: sellswor@jarthur.Claremont.EDU (Scott Ellsworth)
Newsgroups: comp.sys.mac.hardware
Subject: CMS SD60
Message-ID: <7832@jarthur.Claremont.EDU>
Date: 14 Jul 90 09:53:02 GMT
Organization: Harvey Mudd College, Claremont, CA
Lines: 28


  Hi folks.

  I just hooked up a 60 meg CMS external hard drive to my SE/30.  The
drive was formerly formatted under prodos, and I have no mac tools disks
to make my life nicer.  It uses the standard Seagate mechanism, which
brings me to my problem.

  In an attempt to get it working, I hacked HD/SC setup to recognize it. 
This allowed me to install the drivers, but it set the 60 meg drive up
as a 40000K volume.  WHat should I do to get at the other 21xxxK?  If
some kind sould could send me appropriate software or pointers to it, I would
be indebted.  (I will be out of town next week, but I will reply to responses
when I get back.)

  (Any tech types out there know why it is doing this, and a clever way to
hack HD/SC into working properly?  I am somewhat intrigued, but my 68K
assembler is woefully lacking.)

  Thanks in advance,
  Scott Ellsworth
  sellswor@jarthur.claremont.edu

-- 
                                   Scott Ellsworth
                                   SELLSWOR@HMCVAX
                                   sellswor@jarthur.claremont.edu
   B.S. in Physics and Computers, May 1989.  Reasonable rates.  Inquire within