Path: utzoo!attcan!uunet!afsg!ron
From: ron@afsg.Apple.COM (Ron Flax)
Newsgroups: comp.unix.aux
Subject: Re: atstatus:No printer selected by Macintosh chooser
Message-ID: <388@afsg.Apple.COM>
Date: 19 Jul 90 03:19:15 GMT
References: <7617@gollum.twg.com> <43088@apple.Apple.COM>
Reply-To: ron@afsg.apple.com (Ron Flax)
Organization: Apple Federal Systems Group
Lines: 11

In article <43088@apple.Apple.COM> lantz@Apple.COM (Bob Lantz) writes:
>In article <7617@gollum.twg.com> sdh@vax2.twg.com ("Sari Harrison") writes:
>>
>>/etc/appletalk to be ethertalk0.  TCP/IP works just fine, but I can't see 
>>any zones.  When the Mac is running MacOS all the zones are there.
>
>Perhaps this is a silly question, but are you connected to an
>Ethertalk network? If not, use localtalk0 as your appletalk interface.

also note that you must have a Phase 2 EtherTalk network,
Phase 1 will not work unless you use LocalTalk.