Path: utzoo!attcan!uunet!aplcen!samsung!rex!rouge!gator.cacs.usl.edu
From: pcb@gator.cacs.usl.edu (Peter C. Bahrs)
Newsgroups: comp.dcom.lans
Subject: Packet Driver Help
Message-ID: <11789@rouge.usl.edu>
Date: 19 Jul 90 22:22:00 GMT
Sender: anon@rouge.usl.edu
Organization: The Center for Advanced Computer Studies, USL
Lines: 32

Using PS/2 Model 70 and Ungermann NICPS2 ethernet board.
We are also currently running Netware 2.15.

I am considering getting the MD-DOS/IP system fro wisc-ware.  It looks
real cool.  The 3 tsr's to load for their software include a hardware
driver, an internet driver and some memory management stuff.  I was told
that the hardware driver can be replaced by a packet driver to enable
their software to run with Netware.

They suggested looking at the clarkson drivers.  Last time I looked,
there was not a driver for the NICPS2 (why, I am not sure, I have a 
board someone can use to modify the NIPC driver...).  

Question:  Is there currently some sort of driver I can use to get this
to work?

I have a program from Ungermann Bass called etnicpw.exe.  If I run this
and then ipx and net3, netware runs and this is supposed to be compatible
with someone elses ftp type stuff.  Unfortunately, the only ftp-ish type
software I have is IBM -tcpip software which will not work.

Any ideas?


/*----------- Thanks in advance... --------------------------------------+
| Peter C. Bahrs                                                         |
| The USL-NASA Project                                                   |
| Center For Advanced Computer Studies      INET: pcb@gator.cacs.usl.edu |
| 2 Rex Street                                                           |
| University of Southwestern Louisiana      ...!uunet!dalsqnt!gator!pcb  | 
| Lafayette, LA 70504                                                    |
+-----------------------------------------------------------------------*/