Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!mailrus!accuvax.nwu.edu!nucsrl!telecom-request From: hes@ccvr1.cc.ncsu.edu (Henry E. Schaffer) Newsgroups: comp.dcom.telecom Subject: Re: Reference Book Wanted on Telephones Message-ID: <9970@accuvax.nwu.edu> Date: 20 Jul 90 13:20:25 GMT Sender: news@accuvax.nwu.edu Reply-To: "Henry E. Schaffer" Organization: NCSU Computing Center Lines: 28 Approved: Telecom@eecs.nwu.edu X-Submissions-To: telecom@eecs.nwu.edu X-Administrivia-To: telecom-request@eecs.nwu.edu X-Telecom-Digest: Volume 10, Issue 502, Message 6 of 15 In article <9620@accuvax.nwu.edu> varney@ihlpf.att.com (Al L Varney) writes: X-Telecom-Digest: Volume 10, Issue 475, Message 9 of 9 >In article <9506@accuvax.nwu.edu> sgtech!adnan@ico.isc.com (Adnan >Yaqub) writes: >>Could some kind body please point me to a suitable reference which >>describes the signaling between the main office and my home phone. ... >There is no true reference for this, since the answer depends on where >you look at the subscriber loop; central office or customer end. ... However, there are some references which give quite a lot of info and which are a good place to start. One book which I have given to many people as a way to get started is: Understanding Telephone Electronics Developed and Published by Texas Instruments Learning Center J. L. Fike, et al 1983 Radio Shack catalog number 62-1388 I haven't checked lately to see if there is a new edition or even if it is still available. This is a self-teaching type of text with quizzes and answers for each chapter. henry schaffer n c state univ