Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!samsung!uunet!ncrlnk!ncrwic!encad!entec!jlohmeye
From: jlohmeye@entec.Wichita.NCR.COM (John Lohmeyer)
Newsgroups: comp.periphs.scsi
Subject: Re: Question: How to obtain the CAM spec
Message-ID: <604@entec.Wichita.NCR.COM>
Date: 25 Jul 90 03:16:24 GMT
References: <1990Jul18.122826.11194@Matrix.COM> <602@entec.Wichita.NCR.COM> <13376@cbmvax.commodore.com>
Reply-To: jlohmeye@entec.UUCP (John Lohmeyer)
Distribution: usa
Organization: NCR Corporation, Wichita, KS
Lines: 31

In article <13376@cbmvax.commodore.com> jesup@cbmvax (Randell Jesup) writes:
>In article <602@entec.Wichita.NCR.COM> jlohmeye@entec.UUCP (John Lohmeyer) writes:
>>In article <1990Jul18.122826.11194@Matrix.COM> srm@matrx.matrix.com (Steve Morris) writes:
>>>
>>>Where/How can I obtain the common access method (CAM)
>>>specification?
>...
>>The latest version of the CAM draft can be found on the SCSI BBS at
>>316-636-8700. ....<rest deleted>.... 
>
>	Messydos, yech. ....<rest deleted>...

I refuse to engage in another <os> vs. <os> war :-).  If you can wait a couple
weeks, the updated files will be on Mark Seiffert's mgse archive server.  I
am sending him a floppy with the latest files.











-- 
John Lohmeyer         J.Lohmeyer@Wichita.NCR.COM
NCR Corp.             uunet!ncrlnk!ncrwic!entec!jlohmeye
3718 N. Rock Rd.      Voice: 316-636-8703
Wichita, KS 67226     SCSI BBS 316-636-8700 300/1200/2400 24 hours