Path: utzoo!attcan!uunet!aplcen!samsung!munnari.oz.au!bruce!merlin!morgana!ianh
From: ianh@bhpmrl.oz.au (Ian Hoyle)
Newsgroups: comp.protocols.appletalk
Subject: Re: AppleTalk Phase 2 and FastPath Manager II?
Message-ID: <ianh.648917887@morgana>
Date: 25 Jul 90 14:58:07 GMT
References: <9007231855.AA11208@jessica.stanford.edu>
Sender: usenet@bhpmrl.oz.au
Lines: 27

morgan@JESSICA.STANFORD.EDU writes:


>As a followup to my previous message about how easy it is to use Phase
>2 with a FastPath, here's a fairly major problem I've observed.  On
>every machine I've tried, including a Mac II, IIx, and SE/30, if the
>Mac is Ethernet-attached and using AppleTalk Phase 2 and I run the
>FastPath Manager II, the Mac freezes when the box containing the names
>of the local FastPaths appears.  If I switch the Mac to Phase 1,
>everything works fine.  The relevant version numbers are System 6.0.4
>and 6.0.5, FastPath Manager II 5.1, and EtherTalk 2.0.1 (6/29/89).
>Has anyone else seen this?

Sure have :-(  It's a real pain having to switch to phase I for configuring
the Fastpath using the Manager and *then* going back to phase II.

		ian
--
                Ian Hoyle
     /\/\       Image Processing & Data Analysis Group
    / / /\      BHP Melbourne Research Laboratories
   / / /  \     245 Wellington Rd, Mulgrave, 3170
  / / / /\ \    AUSTRALIA
  \ \/ / / /
   \  / / /     Phone   :  +61-3-560-7066
    \/\/\/      FAX     :  +61-3-561-6709
                E-mail  :  ianh@bhpmrl.oz.au