Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!elroy.jpl.nasa.gov!ucla-cs!rutgers!cmcl2!lanl!meevax.meediv.lanl.gov!haase
From: haase@meevax.meediv.lanl.gov (HAASE_PETER_K)
Newsgroups: comp.protocols.appletalk
Subject: Fastpath Error Message
Message-ID: <58086@lanl.gov>
Date: 25 Jul 90 20:41:07 GMT
Sender: news@lanl.gov
Reply-To: haase@meevax.meediv.lanl.gov
Organization: Los Alamos National Lab. Mech. & Elec. Eng. Div.
Lines: 20
News-Software: VAX/VMS VNEWS 1.3-4


I have a Fastpath and just upgraded Fastpath Manager to version 5.1

Upon loading all the config info I get the following message in the Log:

PANIC!
Not enough buffers for LTALK RTMP entry!
KFPS AT#220 ET#134 PROM REV 4.1 (88/10/07) STATE=BE A BRDGE HW
STATUS=0

Now I cannot use TCP/IP on the Appletalk side. I can connect to the
VAX Cluster with Appletalk for VMS using Pacerlink. I spoke with
SHIVA but they do not seem to have as good Technical Support as when
Kinnetics was providing it. As a matter of fact I did call them and
I got the Try this and That to no avail......

-----------------------------------------------------------------------------
      Peter K. Haase				haase@meediv.lanl.gov
			(505) 667-2684
                Los Alamos National Laboratory (LANL)