Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!cs.utexas.edu!rice!uupsi!rodan!rodan.acs.syr.edu!lcbrink
From: lcbrink@rodan.acs.syr.edu (Lee C. Brink)
Newsgroups: comp.sys.amiga
Subject: Problems w/MIDI
Keywords: MIDI
Message-ID: <3976@rodan.acs.syr.edu>
Date: 21 Jul 90 14:18:07 GMT
Sender: lcbrink@rodan.acs.syr.edu
Reply-To: lcbrink@rodan.acs.syr.edu (Lee C. Brink)
Organization: Syracuse University, Syracuse, NY
Lines: 18


  The subject says it all.  I have the following system:

           Amiga 2500/20 
           Workbench 1.3
           2 Internal 3 1/2" drives
           ECE MIDI Interface (W/Pass-thru)
           Roland D-10 Synth
           Bars & Pipes Sequencer

  Now for the problem:  There is no output on the midi lines.  The software,
synth, and interface works fine straight out of the box on an Amiga 500
with Workbench/ROM 1.3, but on my 2500 there is no output whatsoever on
the midi cables (Checked with a MIDI tester).  I have tried new CIA's, 
removing the 2620 board, removing the 2090a (Throwing it out a window :-)
but with no success.  Now here's the kicker - My modem works fine plugged
into the pass-thru of the MIDI interface.  Does anyone have any clue
as to reasons for MIDI not working?