Path: utzoo!utgpu!watserv1!watmath!att!rutgers!usc!pollux.usc.edu!papa
From: papa@pollux.usc.edu (Marco Papa)
Newsgroups: comp.sys.amiga
Subject: Re: JrComm 1.0
Message-ID: <26070@usc.edu>
Date: 21 Jul 90 03:31:51 GMT
References: <1509@faatcrl.UUCP> <26053@usc.edu> <1518@faatcrl.UUCP>
Sender: news@usc.edu
Distribution: na
Organization: Felsina Software, Los Angeles, CA
Lines: 15

In article <1518@faatcrl.UUCP> jprad@faatcrl.UUCP (Jack Radigan) writes:
>Think about this again.  On a machine with a 2091 and a still stomped location
>zero, you get a semephore guru.  If I stomp on location zero with a non-zero
>value using an A1000 and then run JR-Comm, it does not guru.  This is what is
>so baffling.

In trying to duplicate the situation, I am assuming are you using the SAME 
value on location zero as on the A2091. Im I right?

-- Marco
P.S.:
This looks like program debugging by Committee :-)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
"Xerox sues somebody for copying?" -- David Letterman
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=