Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!sdd.hp.com!uakari.primate.wisc.edu!aplcen!uunet!dayvb!afitamy!rumford
From: rumford@afitamy.fidonet.org (Don Rumford)
Newsgroups: comp.sys.amiga
Subject: Re: A3000 Video Chips
Message-ID: <280.26ABF8A3@afitamy.fidonet.org>
Date: 24 Jul 90 00:14:08 GMT
Organization: AFIT Amiga Users BBS(AFITAUG), Dayton, Oh. (513) 252-7681
Lines: 32

>> you do not have to replace your video chips to convert an
> NTSC 3000 to
>> PAL or vice-versa.
>>
 
> Note: changing the jumper only gets you a PAL like machine
> if it was built to
> be an NTSC machine (same applies the other way around also).
> The video will be
> only slightly off spec but close enough; however, anything
> that is based on
> the master crystal will still be clocking at the NTSC rate.
> This includes
> things like the CIAs (used by timer.device), the audio
> hardware and the
> processor.
 
> rsbx
 
Ray,
     Thank you.....I was tormenting myself trying to figure out how th ECS could do all that.
 
                                                        -Don-

--  
----------------------------------------------------------------------
Don Rumford - via FidoNet node 1:110/300
UUCP: afitamy!rumford
ARPA: rumford@afitamy.fidonet.org
---------> The AFIT Amiga Users BBS/UFGateway  Dayton, Oh.  1:110/300
Give me Amiga or give me boredom! <-----------------------------------