Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!cbmvax!jesup
From: jesup@cbmvax.commodore.com (Randell Jesup)
Newsgroups: comp.sys.amiga
Subject: Re: A2091
Keywords: A2091
Message-ID: <13431@cbmvax.commodore.com>
Date: 25 Jul 90 18:41:38 GMT
References: <1990Jul24.112406.27354@monu6.cc.monash.edu.au>
Reply-To: jesup@cbmvax (Randell Jesup)
Organization: Commodore, West Chester, PA
Lines: 15

In article <1990Jul24.112406.27354@monu6.cc.monash.edu.au> craig@monu6.cc.monash.edu.au (Craig Matchan) writes:
>
>Can anyone explain what the optimum values for Mask and MaxTransfer should be
>set to for a 2091 with 2 meg of memory.  The 2000hd manual refers you to 
>"Commodore Amiga Enhancer Software Manual", but when I purchsed the 2091 from
>Creative Computers, all I recieved was the 2000HD introduction manual.
	
	Leave them at the defaults given by HDToolBox.  It's designed to give
you reasonable defaults for everything possible.  In this case, mask defaults
to all 24-bit memory, and maxtransfer is set to (if I remember right) 2 meg.

-- 
Randell Jesup, Keeper of AmigaDos, Commodore Engineering.
{uunet|rutgers}!cbmvax!jesup, jesup@cbmvax.cbm.commodore.com  BIX: rjesup  
Common phrase heard at Amiga Devcon '89: "It's in there!"