Path: utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uwm.edu!rutgers!cbmvax!jesup From: jesup@cbmvax.commodore.com (Randell Jesup) Newsgroups: comp.sys.amiga.hardware Subject: Re: Quantum 170S on A3000 Keywords: help! Message-ID: <13341@cbmvax.commodore.com> Date: 20 Jul 90 21:06:32 GMT References: <2069@esunix.UUCP> Reply-To: jesup@cbmvax (Randell Jesup) Organization: Commodore, West Chester, PA Lines: 37 In article <2069@esunix.UUCP> blgardne@esunix.UUCP (Blaine Gardner) writes: >If anyone has a Quantum ProDrive 170S working on an A3000, I'd >appreciate some help. ... >Everything seems to be working just fine, and then I get a lockup of the >whole SCSI bus. I've got the stock Quantum 100S addressed at 6 (where it >came from CBM), a CDC Wren III addressed at 0, and the Quantum 170S >addressed at 1. [further description of random lockups] Try setting it up with "no" for Supports Reselection. The drive does support it, but there are some problems with reselection on the A3000 at the moment. Anyone using multiple SCSI drives on the A3000 should select "no" for reselection when setting them up until this is dealt with. >There are three jumpers on the drive I don't understand: SS, EP & WS. >The Q100S had EP jumpered, and the other two open, so I set the Q170S up >the same way. What do these jumpers do? Do I have them right? One is probably a parity jumper, I forget about the others. >Oh, one more thing. The Q170S is capable of synchronous SCSI, and so is >the A3000. Does anything exist yet that will allow me to enable >synchronous mode for the Q170S (and not attempt synchronous mode on the >Wren III)? Write a small SCSIDirect program that tells the Quantum to request Synchronous mode (we don't default to synch since certain drives crash if you make a synchronous request of them). >{decwrl, utah-cs}!esunix!blgardne -- Randell Jesup, Keeper of AmigaDos, Commodore Engineering. {uunet|rutgers}!cbmvax!jesup, jesup@cbmvax.cbm.commodore.com BIX: rjesup Common phrase heard at Amiga Devcon '89: "It's in there!"