Path: utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uwm.edu!rpi!crdgw1!uunet!mcsun!cernvax!chx400!fatcat!acadch!impch!accsys!augs!josef From: josef@augs.ccs.imp.com (Josef Egloff) Newsgroups: comp.sys.amiga.hardware Subject: missplaced icons, 2nd Message-ID: Date: 22 Jul 90 01:55:01 GMT Lines: 22 hello, fist, thanks to all who mailed me their hints. a some time ago, I posted my problems with the workbench icons on my A2000 (enhanced with GVP 68030/68882 board. There are some hints I received, but no one helps. The problem (not really, but my eyes....) is still there. The file-protection flags are set right (rwed) and the harddisk isn't locked. I think the problem must be in the softhacks that the people at GVP had done. This because, when I have a disk with a r/w error, then comes a requester wich told me I should run DISKSALV (yes! not the DiskDoctor) or the workbenchs name isn't workbench but FASTBENCH. Ok, think I see the solution will be very tricky.., but I hope there is one. cu josef -- < Josef Egloff | USENET: josef@augs.ccs.imp.com > < Pfaffnernweg 19 | PATH: impch!accsys!augs!josef > < CH - 4852 Rothrist | > < Switzerland | AUGS: as SYSOP (acc #1) >