Path: utzoo!attcan!uunet!cs.utexas.edu!lgc.lgc.com!usenet
From: max@maxsun.lgc.com (Max Heffler)
Newsgroups: comp.sys.apple2
Subject: Latest file transfer problems
Keywords: kermit, x/y/zmodem, terminal server, telnet
Message-ID: <1990Jul20.133624.27291@lgc.com>
Date: 20 Jul 90 13:36:24 GMT
Sender: max@lgc.com
Organization: Landmark Graphics Corp., Houston, Tx
Lines: 15

I ran a number of experiments in file transfer last night using kermit,
x/y/zmodem and Zlink, kermit, Talk-is-cheap, AppleWorksGS, ATP, ...
The kermit problem, and possibly the rest, seems to be that I am
entering my office Sun computer via a terminal server and then telnetting
over to my Sun.  So the device the Sun kermit sees is /dev/ttyp6 or
some such network pseudo-terminal and I don't know if that is why kermit
does not even begin to tranfer any bytes.  x/y/z-modem send 2K or 16K,
before it starts giving errors.  Can I perform binary file tranfers via
this multihop situation or do I need to find a direct inbound CPU?
Thanx in advance...
--
Max Heffler			internet: max@lgc.com
Landmark Graphics Corp.		uucp: ..!uunet!lgc!max
333 Cypress Run, Suite 100      phone: (713) 579-4751
Houston, Texas  77094