Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!snorkelwacker!ira.uka.de!fauern!fauern!csbrod From: csbrod@medusa.informatik.uni-erlangen.de (Claus Brod ) Newsgroups: comp.sys.atari.st Subject: Re: connect 2 hard disks to one controller Message-ID: <3027@medusa.informatik.uni-erlangen.de> Date: 25 Jul 90 09:41:10 GMT References: Organization: CSD, University of Erlangen, W-Germany Lines: 24 meulenbr@cst.philips.nl (Frans Meulenbroeks) writes: >I'm trying to connect two drives to one Adaptec 4000 controller, >using both lun 0 and lun 1. Is it really a 4000 or rather a 4070 (Megafile 30/60)? >The problem is that I do not get a response from the drive at lun 1. >I've swapped cables, disks etc. (but not the adaptec, since I only have >one). If you own a Megafile 30/60, there's a reason why. ATARI made some changes on the motherboard; if you snail-mail me, I can describe them and the things what you have to do to cure the problem. >I'm not only not able to get 2 drives working. If they are both >connected, the drive at lun 0 will not operate eiter. Power problem? Have you tried with external power for the second drive? ---------------------------------------------------------------------- Claus Brod, Am Felsenkeller 2, Things. Take. Time. D-8772 Marktheidenfeld, West Germany (Piet Hein) csbrod@medusa.informatik.uni-erlangen.de ----------------------------------------------------------------------