Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!mcsun!tuvie!acmis!joe From: joe@acmis.cmis.co.at (Johannes Rupp) Newsgroups: comp.sys.att Subject: Re: TCP/IP with 3B2-400 Message-ID: <1990Jul23.132644.7854@acmis.cmis.co.at> Date: 23 Jul 90 13:26:44 GMT References: <90199.164501SHANLEY@MAINE.BITNET> Organization: Coordinated Management Information Systems / NIELSEN Company Lines: 54 In <90199.164501SHANLEY@MAINE.BITNET> SHANLEY@MAINE.BITNET writes: >Equipment: AT&T 3B2-400 > Unix V 3.1 > Wollongong TCP/IP WIN*/3B Interface Rel 3.0.1 > >Problem: Can telnet out of the machine but can't telnet in. > ie. telnet me and telnet umofm.umeofm.maine.edu > and telnet 127.0.01.1 > doesn't work. > > ftp and ping are fine and telnet out of umofm is fine. > > >My senerio: It seems that the telnetd daemon/server is not getting > started. I have played with the nlsadmin command with > the following results: > > nlsadmin -x tcp INACTIVE > nlsadmin -i net_spec already initialized > nlsadmin -s tcp addresses not initialized for tcp > > When the network software is started I get the following message: > nlsadmin: Addresses not initialized for tcpip > >Any help is appreciated! > > >Kevin Shanley >System Administrator >Office of Facilities Management >University of Maine >Orono, Maine >shanley@umofm.umeofm.maine.edu >shanley@maine.caps.maine.edu >207-581-2681 I had exactly the same problem like you until I figured out that an old version of the Networking Support Utilities was the reason for this. Installing NSU Rel. 1.1 fixed the problem perfectly on my machine (also a 3B2/400 running TCP/IP WIN*/3B Interface Rel. 3.0.1) I hope that helps you too Johannes -- +------------------------------------------------------------------------+ | CMIS Austria | Voice: (++43-222) 89 109 Ext. 110 | | NIELSEN Austria | Voice: (++43-222) 89 110 Ext. 110 | | Moeringgasse 20 | Fax: (++43-222) 89 110 77 |