Path: utzoo!attcan!uunet!mailrus!ncar!mephisto!udel!burdvax!hpwisf1!starner
From: starner@ISF.Unisys.COM (Mark Starner)
Newsgroups: comp.sys.ibm.pc
Subject: Help with HITACHI DK511-5
Message-ID: <402@hpwisf1.ISF.Unisys.COM>
Date: 22 Jul 90 18:20:48 GMT
Sender: news@ISF.Unisys.COM
Organization: Unisys Corp, ISF, Hanover, MD
Lines: 26

I am trying to add a Hitachi DK511-5 to my AT clone.

I set the CMOS to the right type. when I try the drive alone
all is fine... but when i connect it in with my 1st drive, a
NEC D5146H, nothing works right. I suspect the drive select on the
Hitachi is incorrect. Would anyone out there have the jumper settings
i need for this drive? The Hitachi is a ST-506 drive, 5.25 form factor,
Full height drive, 40MB, 699 Cyl, 7 heads, MFM encoding, 30 ms access time.

Here is my config:

Controller: WD1003-WAH

1st Drive: NEC D5146H
2nd Drive: Hitachi DK511-5

Thanks
-------------
Mark Starner
Unisys Corporation/Integration Support Facility
starner@isf.unisys.com
--
-------------
Mark Starner
Unisys Corporation/Integration Support Facility
starner@isf.unisys.com