Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!wuarchive!rex!hoang
From: hoang@rex.cs.tulane.edu (Hoa`ng Tie^'n Du~ng)
Newsgroups: comp.sys.ibm.pc.hardware
Subject: VGA and EGA card info wanted
Message-ID: <3919@rex.cs.tulane.edu>
Date: 24 Jul 90 06:13:16 GMT
Organization: Computer Science Dept., Tulane Univ., New Orleans, LA
Lines: 26
Summary:
Expires:
Sender:
Followup-To:
Keywords:


    I have an EGA card and a VGA card that I have no documentation for and
would like to know how to set the DIP switches and jumpers.

    The EGA card has a Genoa chipset with a BIOS chip labeled EXPERT SEGA
BIOS v 2.41-3.  There is a 6-position DIP switch and three jumpers: 2 with
3 pins (labeled JMP1 and JMP2) and one with 6 pins (labeled JMP3).  There are
also two RCA jacks--What are their functions?  The closest thing to a model
number on the board is LH6392.

    The VGA card has a Paradise chipset and is of the 8-bit variety.  It is
marked as made by WDC (Western Digital?).  The Paradise chip is labeled
PVGA1A 38331.  There are a 3-pin jumper labeled W1 and a 4-position DIP
switch.

    Any information that you may have about these cards would be greatly
appreciated if you would share it with me.

Thanks in advance,
Dzung Hoang
-- 
-----------------------------------------------------------------------------
hoang@comus.cs.tulane.edu                   hoang@rex.cs.tulane.edu
hoang@comus.UUCP                            hoang@rex.UUCP
tulane!comus!hoang                          tulane!rex!hoang
-----------------------------------------------------------------------------