Xref: utzoo comp.sys.ibm.pc.hardware:422 comp.sys.misc:2889
Path: utzoo!utgpu!news-server.csri.toronto.edu!rutgers!usc!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!aplcen!uunet!mcsun!ukc!reading!cf-cm!cybaswan!iiitsh
From: iiitsh@cybaswan.UUCP (Steve Hosgood)
Newsgroups: comp.sys.ibm.pc.hardware,comp.sys.misc
Subject: Software switching of TURBO on AT clone motherboard
Message-ID: <1905@cybaswan.UUCP>
Date: 12 Jul 90 13:25:39 GMT
Reply-To: iiitsh@cybaswan.UUCP (Steve Hosgood)
Organization: Institute for Industrial Information Technology
Lines: 14
References:

The manual for the ZEN 160B AT clone motherboard states that the TURBO
clock mode (i.e 12MHz instead of the usual 8MHz) can be switched on/off
by typing CTL-ALT-<minus>. (This is with AWARD 3.3 BIOS by the way.. )

I need to be able to switch clock speeds from inside a program. Can anyone
tell me how to do this please?

E-mail will be summarised to the net where appropriate.
Thanks in advance

Steve                                             |  WALES: "Land of Song
iiitsh@pyr.swan.ac.uk                             |   and Rugby^H^H^H^H^H
..or in Britain, where we drive on the other side:|    Ice Hockey"
iiitsh@uk.ac.swan.pyr                             |