Path: utzoo!attcan!uunet!decwrl!ucbvax!tut.cis.ohio-state.edu!pacific.mps.ohio-state.edu!ohstpy!miavx1!rjlewis
From: rjlewis@miavx1.acs.muohio.edu (Richard J. Lewis, Jr. - Hacker@Large)
Newsgroups: comp.sys.ibm.pc.programmer
Subject: Re: Mattel PowerGlove Software Interface
Message-ID: <1913.26ae3f76@miavx1.acs.muohio.edu>
Date: 26 Jul 90 05:55:17 GMT
References: <1990Jul23.170617.10037@ux1.cso.uiuc.edu>
Lines: 25

In article <1990Jul23.170617.10037@ux1.cso.uiuc.edu>, reed@oboe.cs.uiuc.edu (Daniel Reed) writes:
> The July '90 issue of byte contains a description of a hardware
> and software interface that will allow the Mattel/NES Powerglove
> ...
> 
> Does anyone out there have a copy of the code that they could send me?
> I don't want to wait the two-four months needed to get a copy from
> Byte, and I'm not a BIX subscriber.
> 

  That article was neat!  Wish I had a power glove.  Hey, could you tell us 
how it goes?

  If you don't suscribe to BIX - no problem.  You can call BYTENet at (617) 
861-9764, as it says on page 5 of Byte.  Program Listings are always 
availabe there too.  I've gotten some listings from that number.  It's a 
Fido BBS run on PC's that anyone can call.

  Good luck!
-- 
   __                   Rich Lewis
  /  )              /   rjlewis@MIAVX1.acs.muohio.edu
 /    __  __.  _   /_   RL83SANU AT MIAMIU.BitNet
(__/ / (_(_/\_/_)_/ /_  "Some would call it 'BAD' software...I prefer 
                         DARING!"