Path: utzoo!attcan!uunet!tut.cis.ohio-state.edu!zaphod.mps.ohio-state.edu!samsung!xylogics!transfer!lectroid!k1te
From: k1te@lectroid.sw.stratus.com (Bradshaw Lupton)
Newsgroups: comp.sys.mac.hardware
Subject: changing mac scsi register values
Message-ID: <1786@lectroid.sw.stratus.com>
Date: 23 Jul 90 20:12:37 GMT
Reply-To: k1te@.stratus.com (Bradshaw Lupton)
Organization: Stratus Computer, Inc.
Lines: 18


I am trying to interface to a scsi disk controller that provides neither 
parity nor ATN signals. (lucky me)

The device information for the scsi chip on the mac gives register values
that will allow parity to be shut off and ATN to be shut off.

Is there a technote, or a method of changing the initial scsi register
values?

			tnx, Bradshaw


-- 
		| Bradshaw B. Lupton Jr.     |================| 
		| Stratus Computer, Inc.     |k1te@stratus.com| 
		| Marlboro, Ma 01752         |================| 
		| 508 490 6484 / 480 8219(f) |/\/\/\/\/\/\/\/\|