Path: utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!visdc!jiii
From: jiii@visdc.UUCP (John E Van Deusen III)
Newsgroups: comp.unix.i386
Subject: Re: SCO uucico xon/xoff setting
Message-ID: <746@visdc.UUCP>
Date: 21 Jul 90 00:37:39 GMT
References: <1990Jul13.213314.5182@actrix.co.nz>
Organization: VI Software Development Company, Boise, Idaho
Lines: 20

In article <1990Jul13.213314.5182@actrix.co.nz> paul@actrix.co.nz
(Paul Gillingwater) writes:
> [How do you] ...
> Enable or disable Xon/Xoff on the port that uucico is using to call out
> ...
> -- 
> Paul Gillingwater, paul@actrix.co.nz

Both uucico and cu will set ixon to what they require without regard to
the previous settings.  If you are having a problem, it might help to
verify that the modem is not eating the Xoffs sent by the DTE.

The most common and desirable program to respawn to the communication
line via inittab is /usr/lib/uucp/uugetty; since this allows the same
line to be used for both incoming and outgoing calls.
--
John E Van Deusen III, PO Box 9283, Boise, ID  83707, (208) 343-1865

visdc!jiii
vandeuse@ted.cs.uidaho.edu